Panasonic WJ-FS309 User Manual

Page of 43
32
4. Zoomed Spot Picture
The following function is available in MULTISCREEN
OUT picture only.
1. Repeat the procedures described above for Spot
Picture.
2. Press the 
EL-ZOOM
button to display the zoomed pic-
ture. The “+” sign appears in the picture.
Note:
The  “+” sign disappears if no operation is per-
formed within approx. 5 seconds. If the “+” sign dis-
appeared, press the 
EL-ZOOM
button again so that
the “+” sign appears in the picture.
EL-ZOOM
3. Press the cursor buttons (C,  D,  A,  B) to move the
zoomed area within the picture.
4. Press the 
+
button to zoom in, or 
button to zoom out.
Notes:
• When the 
+
button is pressed, the picture is
zoomed twofold.
• The picture cannot be zoomed out to be smaller
than the original size by pressing the 
button.
5. To cancel this mode, press the 
EL-ZOOM
button. The
selected picture is displayed in normal size in spot
mode.
STILL
STILL
3. Still Spot Picture
The following function is available in MULTISCREEN
OUT picture only.
1. Repeat the procedures described above for Spot
Picture.
2. Press the 
STILL
button to freeze the displayed picture.
The LED on the 
STILL
button lights up, and the LED on
the pressed 
CAMERA SELECT
button starts to blink.
The camera title and “STILL” (both blinking) alternate in
the display.
3. To cancel the still picture, press the 
STILL
button
again.
The LED on the 
STILL
button goes off and the selected
playback picture is displayed in spot mode.