Polycom DOC2702A User Manual
Chapter 16-Network Services
Polycom, Inc.
16-3
For more information, see the RealPresence Collaboration Server (RMX) 1500/2000/4000 Getting
Started Guide, "Procedure 1: First-time Power-up” on page
Started Guide, "Procedure 1: First-time Power-up” on page
.
Modifying the Management Network
The Management Network parameters need to be modified if you want to:
•
•
Connect directly to the RMX from a workstation
•
Modify routes
•
Modify DNS information
To view or modify the Management Network Service:
1
1
In the RMX Management pane, click the IP Network Services (
) button.
2
In the IP Network Services list pane, double-click the Management Network (
) entry.
The Management Network Properties - IP dialog box opens.
Changes made to any of these parameters only take effect when the RMX is reset. An Active Alarm
is created when changes made to the system have not yet been implemented and the MCU must be
reset.
is created when changes made to the system have not yet been implemented and the MCU must be
reset.
On the RealPresence Collaboration Server (RMX) 2000 an additional tab called LAN Ports appears.
For more information on the LAN Ports tab see Step 8.
For more information on the LAN Ports tab see Step 8.