Polycom DOC2702A User Manual
Polycom RealPresence Collaboration Server (RMX) 1500/2000/4000 Administrator’s Guide
16-48
Polycom, Inc.
—
Spans
•
•
Attached
All other ISDN Properties can only be modified only by deleting the ISDN/PSTN
network service and creating a new PSTN service using the Fast Configuration Wizard.
For more information, see "To Add an ISDN/PSTN Network Service:” on page
3
Click the LAN Ports tab
4
Modify the following fields:
Network Security
System security can be enhanced by separating the Media, Signaling and Management
Networks.
Table 16-28
Default Management Network Service – LAN Ports
Field
Description
Port Speed
The RMX has 3 LAN ports. The administrator can set the speed and
transmit/receive mode manually for LAN 2 Port only.
transmit/receive mode manually for LAN 2 Port only.
Port
The LAN port number: 1, 2 or 3.
Note: Do not change the automatic setting
of Port 1 and Port 3. Any change to Port 1 speed will not
be applied.
Note: Do not change the automatic setting
of Port 1 and Port 3. Any change to Port 1 speed will not
be applied.
Speed
Select the speed and transmit/receive mode for each
port.
Default: Auto – Negotiation of speed and transmit/
receive mode starts at 1000 Mbits/second Full Duplex,
proceeding downward to 10 Mbits/second Half Duplex.
Note: To maximize conferencing performance,
especially in high bit rate call environments, a 1Gb
connection is recommended.
port.
Default: Auto – Negotiation of speed and transmit/
receive mode starts at 1000 Mbits/second Full Duplex,
proceeding downward to 10 Mbits/second Half Duplex.
Note: To maximize conferencing performance,
especially in high bit rate call environments, a 1Gb
connection is recommended.