Polycom DOC2702A User Manual
Polycom RealPresence Collaboration Server (RMX) 1500/2000/4000 Administrator’s Guide
16-54
Polycom, Inc.
4
Modify the required System Flag to enable Multiple Services, DO NOT reset the MCU
yet.
5
Connect the additional network cables to the RMX and change existing connections to
match the required configuration as described in the "RealPresence Collaboration Server
At this point, the Management Network can be modified to match the required local
network settings.
6
Reset the MCU.
7
Connect to the MCU and Add the required IP Network Services to accommodate the
networks connected to the RMX unit.
8
Select a Network Service to act as default for dial out and gateway calls for which the
Network Service was not selected.
9
Place several calls and run conferences to ensure that the system is configured correctly.
Gather Network Equipment and Address Information - IP Network Services
Required Information
Required Information
It is important that before connecting multiple networks and implementing Multiple
Services in the RMX, that you obtain the information needed to complete the IP Network
Service configuration for each connected network from your network administrator.
If the RealPresence Collaboration Server (RMX) 2000 you are upgrading does not include RTM
ISDN or RTM LAN cards, you must install at least one RTM LAN card to enable the definition of
multiple Network Services. If no RTM ISDN or RTM LAN cards are installed, the RealPresence
Collaboration Server (RMX) 2000 works in a single Network Service mode and an alarm is issued by
the system. For more details about the installation of RTM LAN cards, see the RealPresence
Collaboration Server (RMX) 2000 Hardware Guide.
ISDN or RTM LAN cards, you must install at least one RTM LAN card to enable the definition of
multiple Network Services. If no RTM ISDN or RTM LAN cards are installed, the RealPresence
Collaboration Server (RMX) 2000 works in a single Network Service mode and an alarm is issued by
the system. For more details about the installation of RTM LAN cards, see the RealPresence
Collaboration Server (RMX) 2000 Hardware Guide.
Table 16-30
Network Equipment and Address Information per IP Network Service
Parameter
Local Network Settings
Note
Signaling Host IP address
Media Board IP address
(MPM 1)
(MPM 1)
Media Board IP address
(MPM 2)
RealPresence Collaboration
Server (RMX) 2000/
RealPresence Collaboration
Server (RMX) 4000 only
(MPM 2)
RealPresence Collaboration
Server (RMX) 2000/
RealPresence Collaboration
Server (RMX) 4000 only
If more than one media card is
associated with this Network
Service
associated with this Network
Service
Media Board IP address
(MPM 3)
RealPresence Collaboration
Server (RMX) 4000 only
(MPM 3)
RealPresence Collaboration
Server (RMX) 4000 only
If more than one media card is
associated with this Network
Service
associated with this Network
Service