Polycom DOC2702A User Manual
Chapter 21-RealPresence Collaboration Server (RMX) Administration and Utilities
Polycom, Inc.
21-7
Table 21-4 summarizes the resource capacities of fully configured MCUs with the various
card types per line rate in VSW Conferencing mode.
Resource Capacity Modes
The installed media card type (MPM, MPM+ or MPMx) determines the Card Configuration
Mode, which in turn determines the resource allocation method that can be selected for the
MCU. The resource allocation method determines how the system resources are allocated to
the connecting endpoints and it is defined in the Video/Voice Port Configuration. Two
allocation methods are available:
•
•
Flexible Resource Capacity™ – This is the default allocation mode that is used in all
versions and can be used in all Card Configuration Modes and applies to all Conferencing
Modes (SVC and AVC conferencing). The resources are only set to audio and video as a
Modes (SVC and AVC conferencing). The resources are only set to audio and video as a
pool and the system allocates the resources according to the connecting endpoints. This
mode offers flexibility in resource allocation and is available in MPM, MPM+ and
MPMx Card Configuration Modes.
In Flexible Resource Capacity mode, in MPM, MPM+ and MPMx Card Configuration
In Flexible Resource Capacity mode, in MPM, MPM+ and MPMx Card Configuration
Modes, the maximum number of resources is based on the system license, regardless of
the hardware configuration of the MCU. These resources are allocated as CIF resources
by default.
Example: If the MCU is licensed for 80 video resources, but only one MPM card is
Example: If the MCU is licensed for 80 video resources, but only one MPM card is
currently installed in the MCU, the system lets you allocate 80 ports although only 40
video resources are available for participant connection. (However, an active alarm will
be added to the Active Alarms list indicating a resource deficiency).
•
Fixed Resource Capacity™ – This mode is applies to AVC conferencing only and the
resources cannot be used for SVC conferencing. It offers precise usage of resources,
allowing the administrator to set the number of resources guaranteed to each Audio
Only and video connection type in advance. This mode is available only in MPM+ and
MPMx Card Configuration Modes.
Table 21-4
Resource Capacities for Full Capacity RMX per Line Rate in VSW
Resource Type
Maximum Possible Resources
RMX 1500
RMX 2000
RMX 4000
MPMx
MPM
MPM+
MPMx
MPM+
MPMx
Voice (IP)
360
400
800
720
1600
1440
Voice (PSTN)
120
400
400
400
400
400
VSW 2Mb
80
80
160
160
320
320
VSW 4Mb
40
40
80
80
160
160
VSW 6Mb
20
Not
Applicable
40
40
80
80
•
MCU’s with 500MB of memory can support a maximum of 400 simultaneous participant calls,
regardless of how system resources are allocated.
MCU’s with 1000MB of memory are not subject to this limitation.
regardless of how system resources are allocated.
MCU’s with 1000MB of memory are not subject to this limitation.
•
MCU memory size is listed in the Administration > System Information properties box. For more
information see "System Information” on page
information see "System Information” on page
.