Pelco C2900M-B(1/03 User Manual
36
C2900M-B (1/03)
Command Reference
The following table gives an overview of all available commands. (Enter the appropriate informa-
tion where indicated by the quotation marks below. Do not enter the quotation marks.)
tion where indicated by the quotation marks below. Do not enter the quotation marks.)
Table A. Terminal Command Reference
Cmd
Description
?
Displays the help screen.
i
Set up a new IP address.
-> Enter new IP address (old:192.168.152.160): ‘new
IP address’ [Enter]
-> IP address set to <new IP address>
s
Set up a new subnet mask.
-> Enter new subnet mask (old:255.255.255.0): ‘new
subnet mask’ [Enter]
-> subnet mask set to <new subnet mask>
g
Set up a new gateway IP address.
-> Enter new gateway IP address (old:192.168.0.10):
‘new gateway IP address’ [Enter]
-> gateway IP address set to <new gateway IP address>
a
Set up a new alarm IP to connect to.
-> Enter new alarm IP address (old:192.168.0.3): ‘new
alarm IP address’ [Enter]
-> Alarm IP address set to <new alarm IP address>
c
Connects a live video to the specified alarm IP.
-> connecting . . .
PelcoNet tries to call the alarm IP host
connected
PelcoNet has established the connection
d
Disconnects any pending video connection.
-> disconnecting . . .
PelcoNet disconnects
disconnected
PelcoNet has disconnected