Pelco C2900M-B(1/03 User Manual

C2900M-B (1/03)

55

The set of video surveillance features is explained below.

Table F.  Alarm Settings

Video alarm

off

If you select on, the signal from the video source (the
camera in most cases) is monitored constantly for
interruption. If no signal is received, the NET104A
triggers the alarm.

Motion alarm

off

The system has a video motion detection feature.
The video scene is monitored constantly for relevant
motion.

To set motion detection, do the following:

1. Select on to trigger an alarm in the event of

movement.

2. Click the Configuration button to access the Motion

Detection screen. If you want to accept the factory
settings, click the Defaults button.

3. Use the Camera input pull-down menu to select the

camera view you want motion detection on.

4. Click the Select area button to display a window with

a grid superimposed on it. Select the cells in the image
you want the system to monitor for motion. To set an
individual cell, click it with the left mouse button (it will
turn red). Click with the right button to deselect a cell
(which will turn white). Select or deselect multiple
cells by holding down the left or right mouse button
and dragging. Release when finished.

5. Use the Motion tracking pull-down menu to turn

on/off tracking.

6. The Tracker box indicates and controls the direction of

motion detection. You can set motion detection to
operate in one direction only by removing the check
marks in the opposite direction.

(Continued on next page)