Pelco C551M User Manual

Pelco Manual C551M (4/98)

15

Input Voltage:

12 VAC from a 120 VAC, 60 Hz wall transformer provided with
unit (230 VAC, 50 Hz with KBD9000-X)

Power
Consumption:

2.5 vA

Connectors:

Two video BNC connectors (video input and output)

Input Impedance:

75 ohms or high impedance (Hi Z), switchable

Control Method:

15-pulse train (pulse width modulated) superimposed on the
video signal during the vertical blanking interval by the KBD9000
control transmitter. Pulse train occupies 1 TV line period.

Pulse Amplitude:

Approximately 1 Vp-p added to video signal, 333 kHz nominal

Input Video
Level:

1 Vp-p nominal; 2 Vp-p maximum at less than 75% APL;
1.5 Vp-p maximum at 90% APL

System
Bandwidth:

Less than 2 dB down at 10 MHz (exclusive of cable)

Construction:

Aluminum

Finish:

Gray polyester powder coat

Environment:

Indoor; -10° to 120°F (-23° to 49°C)

Dimensions:

See Figure 6.

Weight:

Unit

Shipping

1.95 lb (0.90 kg)

5.0 lb (2.27 kg) approximate

Rating:

NEMA 1

(Design and product specifications subject to change without notice.)

Figure 6.  KBD9000 Dimension Drawing

NOTE:  VALUES IN PARENTHESES ARE CENTIMETERS; ALL OTHERS ARE INCHES

8.10 (20.57)

2.21

(5.61)

7.16

(18.19)

75

Ω

IN        OUT

HiZ

This equipment contains electrical or electronic components that must be recycled properly to comply with Directive 2002/96/EC of the European Union 
regarding the disposal of waste electrical and electronic equipment (WEEE). Contact your local dealer for procedures for recycling this equipment.