Pelco C1927M User Manual
Pelco Manual C1927M (5/99)
11
MONITORS
Main Monitor
- The main monitor can show live video of an individual camera or a
sequence of individual cameras, the same as the spot monitor. But the main monitor is the
only monitor that can show multi-screen displays (more than one camera displayed
simultaneously), run multi-screen sequences, play back video from a VCR, or use the
digital zoom feature of the multiplexer. These functions can be done only when the multi-
plexer is in DISPLAY mode. The multiplexer will not record in DISPLAY mode.
only monitor that can show multi-screen displays (more than one camera displayed
simultaneously), run multi-screen sequences, play back video from a VCR, or use the
digital zoom feature of the multiplexer. These functions can be done only when the multi-
plexer is in DISPLAY mode. The multiplexer will not record in DISPLAY mode.
The monitor can be overridden by an alarm(s) and/or activity detection.
Cameras are digitally time corrected in LIVE and VCR modes and will not roll when
sequenced if they are out of phase.
sequenced if they are out of phase.
Connect your main monitor to the MAIN output. Refer to Table A for the type of video
coaxial cable to use.
coaxial cable to use.
Spot Monitor (Optional)
- The operator can manually call up live video of an individual
camera or a sequence of individual cameras.
The monitor can be overridden by an alarm(s) and/or activity detection.
Cameras are not digitally time corrected and will roll when sequenced if they are out of phase.
Connect your spot monitor to the SPOT output. Refer to Table A for the type of video
coaxial cable to use.
coaxial cable to use.
Proceed to the
VCR
section.
VCR
If you have a Pelco VCR, proceed to the next section,
Pelco’s Time-Lapse VCRs
.
You can connect one VCR to the multiplexer to record or play tapes.
To connect a VCR:
1.
Connect the video. Refer to Figure 6.
For monochrome multiplexers, use standard VCRs. For color multiplexers, use
standard or SVHS VCRs.
standard or SVHS VCRs.
For standard VCRs, use the BNC connectors. Refer to Table A for the type of video
coaxial cable to use. For SVHS VCRs, use the SVHS connectors. Use video cable
designed for SVHS.
coaxial cable to use. For SVHS VCRs, use the SVHS connectors. Use video cable
designed for SVHS.
a.
Connect the VCR OUT connector on the multiplexer to the VIDEO IN on your VCR.
b.
Connect the VCR IN connector on the multiplexer to the VIDEO OUT on your VCR.
NOTE:
Skip this section if
you are connecting your
multiplexer to a
MX4000SVR Multiplexer
Server.
multiplexer to a
MX4000SVR Multiplexer
Server.
Figure 6. VCR Wiring Example
RECORD/PLAY
GROUND
VCR
MAIN
SPOT
OUT IN
SVHS
IN COM OUT
ALARMS
1 2 3 4 5 6 7 8
9 10 11
14 15 16
12 13
110-240V~50/60Hz
N
NH
O C C S