Pelco C1927M User Manual

Pelco Manual C1927M (5/99)

29

The Help menu is accessed from any other menu.

1.

Use the up and down arrow buttons in any menu to highlight HELP.

2.

Press the +/- button. The Help menu appears.

Figure 18.  Help Menu

GROUP

QUAD (2x2)

1

04

2

04

3

04

4

04

NINE (3x3)

04
04

DISP/REC

BUTTON            SETTING

VCR SPEED & ALARM

QUICK SETUP

MONITOR SETUP

HELP

+/– 

- SINGLE PRESS MODIFY

 

DOUBLE PRESS CHANGE

  

EDIT DIRECTION

HOLD BUTTONS TO ENTER/EXIT

THEIR ASSOCIATED MENU

USE ARROWS TO NAVIGATE

Figure 17.  Camera Sequence Menu

The multiple camera display formats may be configured using the front panel controls. The
LEDs above the camera buttons will illuminate to indicate which cameras are being displayed.

The on-screen location and size of the picture-in-picture (PIP) display are programmable.
PIP is not available in VCR or RECORD modes.

To program the PIP display:

1.

Press the 

 button.

2.

Press the 

 button (for approximately three seconds) until the message PROGRAM

PIP SIZE appears.

3.

Use the arrow buttons to increase or decrease the PIP display size.

4.

Press the +/- button. The message PROGRAM PIP POSITION appears.

5.

Use the arrow buttons to move the PIP display location.

6.

Press the +/- button to exit the PIP programming menu.