Sony HES-V1000 User Manual

Page of 155
105
V
a
rious
 C
onnec
tions
Connecting an AV Amplifier
If you have an AV amplifier (receiver) and would like to enjoy 
high quality sound, use the supplied HDMI cable. If your HDMI 
device does not support digital audio signals or has no HDMI 
input jack, connect using an optical or coaxial digital cable (not 
supplied). If the amplifier has 2ch audio input jacks (L/R), 
connect using an audio cable.
If the amplifier has a Dolby Digital decoder, set [Digital Audio 
Output] in [Audio Settings] accordingly (page 114).
z
Hint
For correct speaker location, see the operating instructions of the 
connected components.
Note
When you connect an HDMI OUT jack or a DIGITAL OUT jack and 
play a video or music, the beginning may be skipped depending on the 
external device.
Connecting with an HDMI cable
Note
Not all HDMI-compatible AV amplifiers (receivers) accept 8ch 
Linear PCM signals.
See also the operating instructions supplied with the connected 
AV amplifier (receiver).
PUSH/OPEN
AC IN
CONTROL S IN/ 
IR IN
HDMI OUT
COMPONENT VIDEO OUT
AUDIO OUT
R
R-AUDIO-L
VIDEO
LINE
IN 1
OUT
S VIDEO
Y
PB
PR
LAN(10/100)
COAXIAL
DIGITAL OUT
PCM/DTS/
DOLBY DIGITAL
L
OPTICAL
HDMI IN
HDMI OUT
HDMI IN
HDMI OUT
Server
To HDMI OUT
HDMI cable (supplied)
To HDMI input jack
To HDMI output jack
AV amplifier with Dolby
Digital or DTS decoder
In this case, connect the amplifier to 
the TV using another HDMI cable 
(not supplied). If the TV has no HDMI 
input jack, connect the TV and the 
server using another video cable.
HDMI cable (not supplied)
To HDMI input jack
TV
,continued