Sony HES-V1000 User Manual
20
d
Remove the lock stick.
A On the bottom of the unit (the same place as
step 3), you should find a lock stick.
B Unlock the lock stick by turning the stick
clockwise 90 degrees and remove it.
Store the lock stick in a safe place as you may need it
when transporting the unit. The lock stick is
necessary for securing the unit to the packing
material to prevent damage of the mechanical block
during shipment and transportation.
when transporting the unit. The lock stick is
necessary for securing the unit to the packing
material to prevent damage of the mechanical block
during shipment and transportation.
C Close the three holes (including the holes in
step 3) with the supplied dust-tight seals.
The dust-tight seals are included in the accessory
box.
box.
e
Place the unit upright.
With two persons, bring the unit gradually into the
upright position (pallet at the side).
With two persons, bring the unit gradually into the
upright position (pallet at the side).
• Make sure to move the unit with at least two persons.
The unit weighs 48 kg (105 3/4 lb).
• Move the unit slowly and carefully so the unit does not
drop out and fall over.
• Refer to the above illustration so as not to hold the
wrong side of the unit.
f
Remove the pallet.
A Remove the cushioning from the top of the
unit.
B Remove the pallet while another person is
holding up the unit.
g
Remove the cover sheet, and place the unit.
A Remove the white cover sheet.
Dust-tight seals
Pallet
Pallet