Sony HES-V1000 User Manual

Page of 155
4
On cleaning
• Use the supplied cleaning cloth for 
cleaning minor blurs. If the blur is 
persistent, use another cloth slightly 
moistened with a mild detergent 
solution. Do not use any type of 
abrasive pad, scouring powder or 
solvent such as alcohol or benzine.
• To avoid malfunctioning, disconnect 
the power cord when cleaning.
Notes about using the 
supplied cleaning cloth
• Make sure the cloth is not dusty before 
use.
• Use the cloth only if it is dry. The 
material is not designed for use when 
wet.
• When the cloth becomes dirty, wash it 
in cold water.
On cleaning discs, disc/lens 
cleaners
Do not use cleaning discs or disc/lens 
cleaners (including wet or spray types). 
These may cause the apparatus to 
malfunction.
On replacement of parts
In the events that this unit is repaired, 
repaired parts may be collected for reuse 
or recycling purposes.
About the glass parts on the 
unit
Glass is used for the front, top, and side 
panels of the unit. Observe the following 
and handle with care. If broken, the glass 
pieces will scatter and will pose a 
danger.
• Do not expose the unit to strong shocks 
such as a tip-over or dropping objects.
• Do not scrape the unit with a sharp 
object. The scratch may cause the glass 
to break.
• Be careful when attaching or detaching 
the glass panels. To attach or detach the 
glass panels, see page 19.
Notes On Disc 
Handling
• To keep the disc clean, handle the disc 
by its edge. Do not touch the surface.
• Do not expose the disc to direct 
sunlight or heat sources such as hot air 
ducts, or leave it in a car parked in 
direct sunlight as the temperature may 
rise considerably inside the car.
• After ejecting a disc from the server, 
store the disc in its case.
• Clean the disc with a cleaning cloth. 
Wipe the disc from the center out.
• Do not use solvents such as benzine, 
thinner, commercially available disc/
lens cleaners, or anti-static spray 
intended for vinyl LPs.
• If you have printed the disc’s label, dry 
the label before playing.
• Do not attach a sticker type label on the 
disc. The disc changer may be 
damaged.
• Do not insert the following 
unsupported discs, doing so will 
damage the unit or discs.
– Discs whose shapes are nonstandard-
sized or nonstandard-shaped. (card, 
heart, star, etc.).
– Discs with a paper sticker or seals. 
– Discs with a cellophane tape, or an 
adhesive residue of a removed label.
– Discs of non-standard thickness 
(thinner than 1.0 mm, or thicker than 
1.5 mm).
Notes about discs
• “Photo Movies” created on digital 
camcorders cannot be edited on this 
server.
• You cannot mix VR mode and Video 
mode on the same DVD-RW. To 
change the disc’s format, reformat the 
disc (page 93). Note that the disc’s 
contents will be erased after 
reformatting. DVD-Rs (VR mode) 
cannot be reformatted.
• It is recommended that you use discs 
with “For Video” printed on their 
packaging.
• You cannot record or edit DVD-Rs 
(Video mode), or DVD-RWs (Video 
mode) recorded on other DVD devices.
• You may not be able to record or edit 
the following discs if they have been 
recorded on other devices:
– BD-REs and BD-Rs.
– DVD+RWs/DVD+Rs recorded in 
+VR mode, or recorded on a device 
that displays +R/+RW logos.
– DVD-RWs/DVD-Rs recorded in VR 
mode.
• If record on a DVD+RW that has 
recordings made on other devices, the 
server may rewrite its DVD Menu.
• When playing dual layer discs the 
picture and sound may be momentarily 
interrupted when the layers switch.
• Use of discs containing data recorded 
on PCs is not guaranteed. The data may 
be erased after use.
• When you plan to copy photos to a 
DVD, use an unformatted DVD-R, 
DVD+R, DVD-RW, or DVD+RW. 
BD-REs and BD-Rs can be used even 
when they are formatted.
• Some recorded BD-REs/BD-Rs or 
DVD+RWs/DVD+Rs, DVD-RWs/
DVD-Rs/DVD-RAMs, or CD-RWs/
CD-Rs may not play on this server due 
to the recording quality or physical 
condition of the disc, or the 
characteristics of the recording device 
and authoring software. And except for 
DVD-RWs (VR mode), the disc will 
not play if it has not been correctly 
finalized. For more information, see 
the operating instructions for the 
recording device.
• This product is designed to play back 
discs that conform to the Compact Disc 
(CD) standard.
Recently, various music discs encoded 
with copyright protection technologies 
are being marketed by some record 
companies. Please be aware that 
among those discs, there are some that 
do not conform to the CD standard and 
may not be playable by this product.
• The server’s Disc Information display 
may not correctly reflect information if 
the disc is recorded on other devices.
• The server does not support the BDMV 
format (one of the Blu-ray Disc
 
specifications). You cannot playback 
or import BDMV format content edited 
on PCs, or copy such content from the 
HDD to a disc.
• The server does not support BD-ROM 
content that requires Internet 
connection.
About recording and playback
• DVD-RWs (VR mode)/DVD-Rs (VR 
mode) recorded on this server are 
playable only on a DVD-RW (VR 
IMPORTANT NOTICE
Caution: This unit is capable of holding 
a still video image or on-screen display 
image on your television screen 
indefinitely. If you leave the still video 
image or on-screen display image 
displayed on your TV for an extended 
period of time you risk permanent 
damage to your television screen. 
Plasma display panel televisions and 
projection televisions are susceptible to 
this.