Kramer Electronics RC-81R User Manual
KRAMER: SIMPLE CREATIVE TECHNOLOGY
Installing the RC-8IR Universal Room Controller
6
5.1 Setting the Labels and Button Caps
To install the labels and button caps:
1. Remove the required labels from the supplied button label sheet.
2. Hold the button cap so that it is oriented as shown in
2. Hold the button cap so that it is oriented as shown in
with the
“wings” on the left and right sides, and insert the label inside the cap.
Figure 4: Button Cap Orientation
3. Repeat for all eight caps.
4. Retaining the orientation, place the eight button caps on the buttons of
4. Retaining the orientation, place the eight button caps on the buttons of
the RC-8IR (see
Figure 5: Placing the Button Cap