Avaya S8100 User Manual

Enable and disable SNMP

By default, SNMP is enabled on CMC1. If you are not using SNMP, disable it.

To disable SNMP, enter d1disable snmp from a bash session. The command d1disable snmp disables 
SNMP from being run when CMC1 is started.

To enable SNMP, enter d1enable snmp from a bash session. The command d1enable snmp enables 
snmp so that it automatically runs when CMC1 is started.

You must reboot your system for the SNMP settings to be effective.

From SAT, type display system-parameters customer-options and press Enter to display the system 
parameters customer options screen. Ensure that the version is V10.

The license file you downloaded from RFA and installed on the switch will activate RTU features on 
system parameters customer options screen. The “init” logon no longer controls access for activating an 
RTU (right to use).

Please check to ensure that the default and optional features and capacities on the screen coincide with 
the customer’s order. To check the relationship between what was ordered and what was populated on the 
screen, please go to the RFA information page see 

 on page 166. Go to the help 

information section of the RFA page, where you will find a material code/feature job aid that details the 
mapping between the material codes that RFA processes and the features, capacities, and release on the 
systems parameters options screen. If there is a problem with the customer’s order, please contact the 
account team so they can issue another order which will generate a corrected license file from RFA.