Avaya S8100 User Manual
6
Hardware additions
Add circuit packs
S8100 Installation and Upgrades
229
November 2003
6
Hardware additions
This chapter provides the tasks required to install equipment associated with upgrading an existing S8100
system.
system.
For more information about installing adjuncts and peripheral devices, see Installation for Adjuncts and
Peripherals for Avaya Communication Manager (555-233-116).
Peripherals for Avaya Communication Manager (555-233-116).
This chapter is organized as follows:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Add circuit packs
When installing additional features or equipment, it may be necessary to install additional circuit packs.
For a list of allowed circuit packs, see
For a list of allowed circuit packs, see
on page 86. This is a
general procedure to use when adding features or equipment that require adding circuit packs.
1
Log into the system, and answer y to the Suppress Alarm Origination question during login.
2
Install the circuit pack in the carrier.
3
Type change circuit-pack.
4
Verify that the circuit pack appears in the listing.
5
If the circuit pack code does not appear, type the code manually in the proper slot.
6
Type test board long command to test the circuit pack.
7
Log off the system after the addition (and any required administration) is complete.
For information about administering circuit packs and other equipment, see the Administrator’s Guide for
Avaya Communication Manager (555-233-506).
Avaya Communication Manager (555-233-506).