Avaya S8100 User Manual

Avaya (Lucent) access controller bash commands

This chapter provides information about bash commands that are used in the installation process. It also 
includes information about the setip command. These commands are not available to the customer.

The following commands are useful during installation and maintenance tasks and are allowed for the 
avaya logins. After opening the LAC bash shell, enter the name of the command. Refer to Maintenance 
for the Avaya S8100 Media Server with the Avaya G600 and CMC1 Media Gateways, 555-233-149 for 
detailed information.

alarmorig

Turns on alarm origination from the GAM (INADS)

alarmstat

Gives global alarm status (major, minor, or none) for the GAM, Communication 
Manager, and INTUITY AUDIX

autobackup

Enables and disables backup commands

cleargamalarm

Clears every GAM alarm after failure conditions are repaired

d1backup

Backs up translations and other data to the specified destination

d1disable 
SNMP

Disables SNMP

d1enable SNMP

Enables SNMP

avaya help

Displays help for every available command

d1restore

Restores data (from a specified source) that was backed up with the d1backup 
command

downloadboot

Enables download of boot image to firmware

identbackup

Identifies the data (on a specified source) backed up with the d1backup command

  1 of 3