Avaya S8100 User Manual
J
Install and cable a CMC1 cabinet
Check customer’s order
S8100 Installation and Upgrades
343
November 2003
J
Install and cable a CMC1 cabinet
Primarily to assist hardware additions and maintenance activities, this appendix describes procedures for
installing and cabling a CMC1 cabinet to physically connect and access the S8100 Media Server with
CMC1 Media Gateways.
installing and cabling a CMC1 cabinet to physically connect and access the S8100 Media Server with
CMC1 Media Gateways.
NOTE:
A CMC1 is a wall- or table-mounted cabinet, whereas G600 is a 19
″
rack-mounted cabinet.
For information about installing a G600 cabinet, see
.
NOTE:
The physical installation of a CMC1 cabinet is similar to a ProLogix cabinet. The cabling
is also similar, except for the Processor Interface cable (multileg cable). Do not access
applications, such as Communication Manager, until installation and cabling of the
cabinet are finished. Your configuration can consist of an S8100 Media Server with 1, 2,
or 3 CMC1 Media Gateways.
is also similar, except for the Processor Interface cable (multileg cable). Do not access
applications, such as Communication Manager, until installation and cabling of the
cabinet are finished. Your configuration can consist of an S8100 Media Server with 1, 2,
or 3 CMC1 Media Gateways.
This appendix is organized as follows:
•
•
•
•
•
•
•
•
•
NOTE:
After installing and cabling an S8100 with a CMC1, see
on page 99 of
Check customer’s order
1
Check the customer’s order and the shipping packing lists to confirm that all equipment is
included.
included.
2
Report missing equipment to an Avaya representative.
3
Check the system adjuncts and report any damage according to local shipping instructions.