ECS 945GCD-M 89-206-R15101 User Manual

34

Using BIOS

Use this item to define how your system suspends. In the default, S3, the suspend
mode is a suspend to RAM, i.e, the system shuts down with the exception of a refresh
current to the system memory.

This item enables your computer to automatically restart or return to its operating
status.

Use this item to enable or disable the USB function.

Use this item to enable or disable support for legacy USB devices. Setting to Auto
allows the system to detect the presence of USB device at startup. If detected, the
USB controller legacy mode is enabled. If no USB device is detected, the legacy USB
support is disabled.

Press <Esc> to return to the main menu setting page.

The system can be turned off with a software command. If you enable this item,
thesystem can automatically resume if there is an incoming call on the Modem.
Youmust use an ATX power supply in order to use this feature.

These items specify whether the system will be awakened from power saving
modeswhen activity or input signal of the specified hardware peripheral or compo-
nent isdetected.

This page sets up some parameters for system power management operation.

Select the ACPI
state used for
System Suspend.

Help Item

CMOS Setup Utility - Copyright  (C)  1985-2005, American Megatrends, Inc.

              Power Management Setup

ACPI Suspend Type

S3 (STR)

PWRON After PWR-Fail

Power Off

Power On by Ring

 Disabled

Resume By PCI/ PCI-E/Lan PME

Disabled

Resume By USB (S3)

Disabled

Resume By PS2 KB (S3)

Disabled

Resume on RTC Alarm

Disabled

mnlk

: Move

F10: Save     ESC: Exit

Enter : Select

+/-/: Value

F9: Optimized Defaults

F1: General Help