Epson 3010 User Manual

Setting Up the Projector

The remote control uses two AA batteries.

Warning: Keep batteries away from children. If a battery is swallowed, contact your doctor 
immediately.

1. Release the tab and lift open the cover.

2. Insert two new AA batteries as shown. 

3. Insert the tab on the cover and press it down until it clicks into 

place.

Aim the remote control at the screen, or at the front or back of the 
projector. Make sure you are within 32 feet (10 meters) of the projector.

If you suspect the batteries are weak, press the 

illumination button. If 

the buttons do not glow, replace the batteries.

1. Remove the lens cap.

2. Turn on any connected equipment you plan to use.

3. Press the 

On

 button on the remote control or the 

P

power button on the projector.

Remote control

Projector

pl3010_3010e_UG.book  Page 21  Wednesday, September 7, 2011  6:28 PM