Epson 3010 User Manual

Using HDMI Link

4. Set up your connected devices so their HDMI CEC-compatible functions are enabled. 

For details, refer to the device manufacturer’s documentation.

1. Press the 

HDMI Link

 button on the projector’s remote control.

2. Select 

Device Connections

. You see this screen:

3. Use the u and d arrow buttons to select the device you want to operate, then press 

Enter

. Devices are listed by type (Player, Recorder, AV System, or Tuner) and by name, 

if the model number is available.

4. Once the device is selected, use the HDMI Link control buttons on the remote control to 

operate it. You can also use the 

On

 and 

Standby

 buttons, arrow buttons, 

Enter

, and 

Esc

. Commonly available functions include turning on the device when it’s in standby 

mode, starting playback, adjusting the volume, and operating the device’s link menu.

In addition, HDMI Link allows your projector and other devices to be turned on and off 
together:

■

If you turn on a connected device, the projector automatically turns on and switches 
to the correct input source.

■

If you turn on the projector, connected devices such as an amplifier and DVD player 
are turned on. If multiple video devices are connected, the one last used is turned on. 
When you turn off the projector, the connected devices are turned off.

Note: For this to work, the CEC power link function of the connected devices must be enabled.

pl3010_3010e_UG.book  Page 59  Wednesday, September 7, 2011  6:28 PM