Philips HP8183 User Manual

- Check if the voltage indicated on the appliance corresponds to the

local mains voltage before you connect the appliance.

- Check the condition of the mains cord regularly. Do not use the

appliance if the plug, the mains cord or the appliance itself is damaged.

- If the mains cord is damaged, you must have it replaced by Philips, a

service centre authorised by Philips or similarly qualified persons in

order to avoid a hazard.

- This appliance is not intended for use by persons (including children)

with reduced physical, sensory or mental capabilities, or lack of

experience and knowledge, unless they have been given supervision

or instruction concerning use of the appliance by a person

responsible for their safety.

- Children should be supervised to ensure that they do not play with

the appliance.
Caution

- For additional protection, we advise you to install a residual current

device (RCD) in the electrical circuit that supplies the bathroom. This

RCD must have a rated residual operating current not higher than

30mA. Ask your installer for advice.

- Never block the air grilles.

- The appliance has a safety function. If the appliance overheats, it

switches off automatically. Unplug the appliance and let it cool down

for a few minutes. Before you switch on the appliance again, check the

grilles to make sure they are not blocked by fluff, hair, etc.

- Always switch off the appliance before you put it down, even if it is

only for a moment.

- Always unplug the appliance after use.

- Do not wind the mains cord round the appliance.

- HP8183/HP8182/HP8181 only: You may notice a characteristic odour

when you use this hairdryer with the ion function switched on. This is

caused by the ions that are generated and it is not harmful to the

human body.

- Do not use the appliance on artificial hair.

- This appliance is only intended for drying scalp hair.

- Do not use the appliance for any other purpose than described in

this manual.

EnglisH