Runco D-73D User Manual

1.

POWER INPUT (Left-Eye Engine – 100 to 240 VAC)
Connect the left-eye optical engine to power here. 

2.

DHD INPUT (Left-Eye Engine)
An HDCP-compliant digital video input for connecting the HDMI Out (To Display) 
from the Primary DHD Controller.

3.

RS-232C INPUT (Left-Eye Engine) (9-pin, female D-Sub) 
Connect the Display Control output on the Primary DHD Controller to this input (see 
Figure 2-5). 

4.

STANDBY LED (Left-Eye Engine)
Indicates left-eye engine status as follows:

• Solid green = AC power present, ready to turn on.

• Flashing green = Projector is initializing; keypad functions not allowed. 

• Off = Normal operation.

5.

ERROR LED (Left-Eye Engine)
Indicates left-eye engine error conditions as follows:

• Flashing red = Over temperature, user intervention (clear vents, turn on AC) may fix 

problem

• Solid red = Error that requires servicing (fan failure, Power-on Self-Test (POST) 

failure). 

6.

ERROR LED (Right-Eye Engine)
This LED operates identically to the ERROR LED on the left-eye engine.

7.

STANDBY LED (Right-Eye Engine)
This LED operates identically to the STANDBY LED on the left-eye engine.

8.

RS-232C INPUT (Right-Eye Engine) (9-pin, female D-Sub) 
Connect the Display Control output on the Secondary DHD Controller to this input. 

9.

DHD INPUT (Right-Eye Engine)
An HDCP-compliant digital video input for connecting the HDMI Out (To Display) 
from the Secondary DHD Controller.

10. POWER INPUT (Right-Eye Engine – 100 to 240 VAC)

Connect the right optical engine to power here. 

11. CINEWIDE/AUTOSCOPE +12V TRIGGER OUTPUT 

Connect the AutoScope anamorphic lens transport (if present) to this output.