Runco VX-3000D User Manual

Table 3-1 gives a quick overview of the VX-3000d installation process. The sections 
following this one provide detailed instructions. 

1

Choose a location for the projector

2

Install CineWide lens mounting assembly (stationary base 
plate or AutoScope lens motor – optional)

3

Mount the projector

4

Connect the DHD Controller to the projector

5

Connect signal sources to the DHD Controller

6

Connect external controller to RS-232 port (optional)

7

Connect 12-volt trigger outputs to AutoScope lens motor 
and/or other equipment (optional)

8

Connect projector, DHD Controller and lens motor (if 
present) to AC power and power up

9

Primary lens adjustments: projected image size (zoom), 
position (shift) and focus

20, 50

10

For rear-screen and/or ceiling-mount installations, select 
the proper picture orientation 

11

Install CineWide anamorphic lens (optional)

12

CineWide lens adjustments: position, pitch (angle), 
geometry and focus

13

Display calibration: adjust the following for each input and 
display mode (resolution and frame rate); save settings 
when finished:
• Aspect ratio
• Brightness
• Contrast
• Color level
• Tint
• Sharpness
• White Balance