Runco CX-46HD User Manual
Runco CX-40HD/CX-46HD Owner’s Operating Manual
29
PRE
L
IMINAR
Y
Main Menu
The Main Menu is the starting point for accessing all Crystal Series LCD Display functions.
(The ISF Calibration menu is not accessible until you enter a passcode.)
Source
From the Main Menu, select Source to choose a video signal source.
The active source is indicated by an arrow (>) to its left; in the example at right, TV is the
active source.
active source.
Aspect Ratio
To change the aspect ratio (size and shape) of the projected image, select Aspect Ratio
from the Main Menu and press ENTER. Select the appropriate aspect ratio for the type of
program material being viewed; refer to Table 4-1.
from the Main Menu and press ENTER. Select the appropriate aspect ratio for the type of
program material being viewed; refer to Table 4-1.
The currently-selected aspect ratio is indicated by an arrow (>) to its left; in the example at
right, Anamorphic is selected.
right, Anamorphic is selected.
Runco CX-40HD
Source
Aspect Ratio
Picture Adjust
Audio
Channel
Timer
Setup
ISF Calibration
>
TV
INPUT1
INPUT2
INPUT3
INPUT4
RGB
HDMI1
HDMI2
>
16:9
4:3
Letterbox
VirtualWide
The aspect ratio selection persists until you change it. (It is not
saved independently for each input.)
saved independently for each input.)
Note