Fujitronic UG520H-x User Manual

4 Connecting the Memory Extension Unit

The extension memory can be used for the two ways:

1

  Memory expansion 1

The memory size increases as listed in the table below (

*

1).

2

  Memory expansion 2

Turn on DIP SW NO.1 at the back of the UG body (extension mode).

Write data other than programs for the UG (fonts, interface drivers, or screen data) into the extension

memory.

The table below shows the sizes of screen data (

*

2).

*

  Be sure to turn off the power to the UG then turn it on again after turning on DIP SW NO.1.

  The UG screen data size changes depending on the font used, as shown in the table below.

*

1 The screen data size when the expansion memory is used and DIP SW NO.1 is turned off (standard).

*

2 The screen data size when the expansion memory is used and DIP SW NO.1 is turned on.

*

3 Japanese 32 supports 32-dot fonts.  When the magnification coefficient for characters is an even number, a 32-dot font is

used as the base, thus the characters are smoothly displayed.

Setting from the editor is also necessary.

With the UG screen development software (UG00S-CW), set items in the [Memory Expansion] dialog box on

the [Unit Setting] window under [System Setting].

The following functions are available when the SRAM cassette is installed:

Calendar function

Calendar can be displayed even when the PLC is connected that has no calendar function.

SRAM backup function

The following data can be backed up:

•

 Backup of sampling data (data logging function)

•

 As external memory for PLC (memory manager function)

•

 Backup of the internal memory used for macros

•

 Saving of memo pad data

The setting is made from the [Main Menu] screen of the POD main unit or from the editor.  For

details regarding the [Main Menu] screen, refer to Section 1; for details regarding the setting on

the editor, refer to the User's Manual <Function> (FEH376).

Japanese

Japanese 32

English (Western Europe)

Chinese (traditional)

Chinese (simplifide)

Korean

*

3

*

1

*

2

3,200 (1,216)

2,816 (   768)

3,456 (1,408)

3,328 (1,280)

3,200 (1,216)

3,328 (1,344)

7,232 (5,248)

6,848 (4,800)

7,488 (5,440)

7,360 (5,312)

7,232 (5,248)

7,360 (5,376)

3,712 (3,712)

3,200 (3,264)

3,840 (3,904)

3,712 (3,776)

3,712 (3,712)

3,840 (3,840)