Panasonic BT-LH2550E User Manual
36
Main Menu
(continued)
Underlined values indicate factory defaults.
*1 All five input lines (VIDEO, SDI1, SDI2, YP
B
P
R
/RGB, DVI-D) cannot be turned off. An attempt to turn off all
inputs ends when the fourth input line is turned off since it will not be possible to turn off the 5th input line also.
*2 “AUTO” is the factory default, but select a specific format when there is risk that the input signal may be
contaminated by outside noise.
INPUT SELECT
Sub menu
Settings
Description
VIDEO
OFF
ON
ON
Turns VIDEO line to the INPUT button on/off.
*1
FORMAT
AUTO
NTSC
PAL
NTSC
PAL
Selects the video input format.
*2
<AUTO> Automatically selects NTSC or PAL.
<NTSC> NTSC
<NTSC> NTSC
<PAL> PAL
NTSC SETUP
75
00
00
Selects NTSC setup level.
<75>
<75>
Select this function when using 7.5% setup signals.
(Adjusts the interior of the monitor to the 7.5% setup
level to suit the black level)
(Adjusts the interior of the monitor to the 7.5% setup
level to suit the black level)
<00>
Select this when there is no setup signal.
SDI1
OFF
ON
ON
Turns SDI1 line to the INPUT button on/off.
*1
SDI2
OFF
ON
ON
Turns SDI2 line to the INPUT button on/off.
*1
YP
B
P
R
/RGB
OFF
ON
ON
Turns YP
B
P
R
/RGB line to the INPUT button on/off.
*1
MODE
YP
B
P
R
RGB-VIDEO
RGB-COMP.
RGB-COMP.
Selects YP
B
P
R
(component) or RGB input mode.
<YP
B
P
R
>
Selects the YP
B
P
R
signal.
<RGB-VIDEO> Selects the video RGB signal.
<RGB-COMP.> Selects the PC RGB signal.
<RGB-COMP.> Selects the PC RGB signal.
COMPONENT
LEVEL
LEVEL
SMPTE
B75
B00
B75
B00
Selects YP
B
P
R
(component) signal input level.
<SMPTE>
Signal level complies with SMPTE and P
B
and P
R
are
0.7 Vp-p at 100% chroma.
<B75>
Select this when connecting a Betacam or similar
device with a setup function. (Adjusts the interior of
the monitor to the 7.5% setup level to suit the black
level)
device with a setup function. (Adjusts the interior of
the monitor to the 7.5% setup level to suit the black
level)
<B00>
Select this when connecting a Betacam or similar
device without a setup function.
device without a setup function.
SELECT SYNC
INT
EXT
EXT
Selects the sync signal when using YP
B
P
R
and RGB-VIDEO input.
<INT>
Select when the synchronizing signal is
superimposed on the G or Y signal.
superimposed on the G or Y signal.
<EXT>
Select to synchronize with an external synchronizing
signal.
signal.
COMP.
Performs analog PC settings. (“COMP.”
DVI-D
OFF
ON
ON
Turns DVI-D line to the INPUT button on/off.
*1
MODE
DVI-VIDEO
DVI-COMP.
DVI-COMP.
Selects DVI-D input mode.
<DVI-VIDEO> Selects the RGB signal input of RGB video.
<DVI-COMP.> Selects PC input.
<DVI-VIDEO> Selects the RGB signal input of RGB video.
<DVI-COMP.> Selects PC input.