Panasonic PT-DS20KE User Manual
Connecting
ENGLISH - 47
Getting Started
Connecting example: Computers
The following diagram is a connecting example for PT-DZ21KE and PT-DS20KE.
&RPSXWHUIRUFRQWURO
&RPSXWHU
&RPSXWHU
&RPSXWHU
&RPSXWHU
Note
z
The <DVI-D IN> terminal supports single links only.
z
For signals that the projector can project, refer to “List of compatible signals” (
page 167).
z
If you operate the projector using the computer with the resume feature (last memory), you may have to reset
the resume feature to operate the projector.
z
When entering the SYNC ON GREEN signal, do not enter sync signals to the <SYNC/HD> terminal or the
<VD> terminal.
z
When entering DVI-D, some external devices to be connected require EDID to be set. (
page 92)
z
Use an HDMI cable that conforms to HDMI standards such as an HDMI High Speed cable. If a cable that does
not meet HDMI standards is used, video may be interrupted or may not be displayed.
z
The <HDMI IN> terminal of the projector can be connected to an external device with an DVI-D terminal by
using a HDMI/DVI conversion cable, but some devices may not project the image properly or function properly.
Caution
When connecting the projector to a computer or an external device, use the power cord supplied with each
device and commercially available shielded cables.