Panasonic PT-DS20KE User Manual

You can adjust to achieve an optimal image when 

there is a flickering image or smeared outlines.

1)  Press ▲▼ to select [CLOCK PHASE].
2)  Press ◀▶ or the <ENTER> button.

▶

z

The 

[CLOCK PHASE] individual adjustment 

screen is displayed.

3)  Press ◀▶ to adjust the level.

▶

z

Adjustment value will change between [0] and 

[31]. Adjust so that the amount of interference is 

at a minimum.

 

z

Certain signals may not be adjustable.

 

z

Optimal value may not be achieved if the output 

from the input computer is unstable.

 

z

Optimal value may not be achieved when there is a 

shift in the total dot numbers.

 

z

[CLOCK PHASE] can be adjusted only when a 

signal is input to the <RGB 1 IN> terminal or the 

<RGB 2 IN> terminal.

 

z

[CLOCK PHASE] cannot be adjusted when a digital 

signal is input.

 

z

If you press ▶ while the adjustment value is [31], 

the value will become [0]. If you press ◀ while the 

adjustment value is [0], the value will become [31].

Correct various types of distortion in a projected 

image.

Unique image processing technology enables 

projection of a square image on a special screen 

shape.

1)  Press ▲▼ to select [GEOMETRY].
2)  Press ◀▶ to switch the [GEOMETRY] 

▶

z

The setting will change as follows each time 

you press the button.

Does not perform geometric 

adjustment.

[KEYSTONE] Adjusts any trapezoidal distortion in 

the projected image.

Adjusts any curved distortion in the 

projected image.

Uses the computer to perform 

geometric adjustment.

*1:  Advanced skills are necessary to use a computer to control 

geometric adjustment. Consult your dealer.

▶

z

The 

[GEOMETRY:KEYSTONE] or 

[GEOMETRY:CURVED] screen is displayed.

4)  Press ▲▼ to select the item you want 

to adjust, and press ◀▶ to adjust the 

▶

z

The projected image can be corrected.

▶

■[KEYSTONE]

▶

z

Set the throw ratio for the lens used.

▶

z