Panasonic PT-DS20KE User Manual

Image processing is simplified when 1080/60i, 

1080/50i, and 1080/24sF signals are input to reduce 

image frame delay.

1)  Press ▲▼ to select [FRAME 

2)  Press ◀▶ to switch [FRAME 

▶

z

The setting will change as follows each time 

you press the button.

[NORMAL] Standard setting.

Set when the picture is displayed 

later than sound.

 

z

When [FRAME RESPONSE] is set to [FAST], 

picture quality deteriorates. Noise reduction, digital 

cinema quality and P IN P functions also cannot be 

used.

 

z

When [NOISE REDUCTION] is set to other than 

[OFF], [FRAME RESPONSE] cannot be set.

Set this to view 3D display when the scanning 

frequency of the signal is 25 Hz, 50 Hz, and 100 Hz.

1)  Press ▲▼ to select [FRAME LOCK].
2)  Press ◀▶ to switch [FRAME LOCK].

▶

z

The setting will change as follows each time 

you press the button.

Decreases the flickering.

Synchronizes the display to the 

scanning frequency of the input 

signal.

 

z

[FRAME LOCK] is not displayed when the scanning 

frequency of the signal other than above is input or 

2D images are displayed.

 

z

The screen may flicker when the [FRAME LOCK] is 

set to [ON].

 

z

The display may look discontinuous when the 

[FRAME LOCK] is set to [OFF].

This will allow the position of the image to move within 

the display area arbitrarily when the input image is not 

using the whole display area.

1)  Press ▲▼ to select [RASTER 

▶

z

The 

[RASTER POSITION] screen is displayed.

3)  Press ▲▼◀▶ to adjust the position.