Panasonic PT-DS20KE User Manual

Switch the setting when the projector is connected to 

an external device via an HDMI cable and the image 

is not projected correctly.

1)  Press ▲▼ to select [HDMI IN].
2)  Press the <ENTER> button.

▶

z

The 

[HDMI IN] screen is displayed.

3)  Press ◀▶ to switch [HDMI SIGNAL 

▶

z

The setting will change as follows each time 

you press the button.

Select when the DVI-D terminal 

output of an external device (such 

as a computer) is connected to the 

<HDMI IN> terminal via a conversion 

cable or similar cable.

Select also when the HDMI terminal 

output of a computer or other device 

is connected to the <HDMI IN> 

terminal.

Select when the HDMI terminal of 

an external device (such as a blu-

ray disc player) is connected to the 

<HDMI IN> terminal.

 

z

The optimal setting is different depending on the 

output setting of the connected external equipment. 

Refer to the instruction manual of the external 

equipment regarding the output of the external 

equipment.

 

z

The HDMI signal level is displayed per each 30 bits 

of input.

Set to match the signal to input to the <SDI IN 

1>/<SDI IN 2> terminal.

1)  Press ▲▼ to select [SDI IN].
2)  Press the <ENTER> button.

▶

z

The 

[SDI IN] screen is displayed.

3)  Press ▲▼ to select an item.

▶

■To set [SDI LINK]

4)  Select [SDI LINK] in Step 3).
5)  Press ◀▶ to switch [SDI LINK].

▶

z

The setting will change as follows each time 

you press the button.

Set SDI1 input and SDI2 input to 

single link.

[DUAL LINK] Set SDI1 input and SDI2 input to 

dual link.

▶

■To set [SDI SIGNAL LEVEL]

Select the amplitude of the signal to input.

4)  Select [SDI SIGNAL LEVEL] in Step 3).
5)  Press ◀▶ to switch [SDI SIGNAL 

▶

z

The setting will change as follows each time 

you press the button.

Normally use this setting.

Select when gray is displayed as 

black.