Motorola 2000X User Manual
18
PageWriter 2000X User’s Guide
To connect the docking station to your computer:
1. Connect one end of the RS232 cable to your computer’s nine-pin
serial port.
2. Connect the other end of the RS232 cable to the nine-pin
connector in the back of the docking station.
3. Insert the transformer’s round connector into the back of the
charger.
4. Insert the transformer’s two-pronged plug into the power sup-
ply.
5. Snap your PageWriter 2000X Two-Way Wireless Communica-
tions Center into the charger. You are now ready to access the
FLEX PC Partner application from your PageWriter 2000X
Two-Way Wireless Communications Center’s Home menu
wheel. See “FLEX PC Partner” on page 54 for more information
on using the FLEX PC Partner application.
FLEX PC Partner application from your PageWriter 2000X
Two-Way Wireless Communications Center’s Home menu
wheel. See “FLEX PC Partner” on page 54 for more information
on using the FLEX PC Partner application.
The Holster
The durable, clip-on holster allows you to comfortably wear your
PageWriter 2000X Two-Way Wireless Communications Center on
your belt or pocket. Additional accessories are also available. For
more information, call 1-800-548-9954.
PageWriter 2000X Two-Way Wireless Communications Center on
your belt or pocket. Additional accessories are also available. For
more information, call 1-800-548-9954.
RS232 Cable
9-pin
Serial
Ports
Serial
Ports
System Setup
19
System Setup
Your PageWriter 2000X Two-Way Wireless Communications Cen-
ter comes pre-configured and ready for use. Features are available
that allow you to re-configure your pager to more closely reflect
your lifestyle, set the date and time, and select the alert modes and
types. For information on customizing other features, see “Custom-
ize” on page 47.
ter comes pre-configured and ready for use. Features are available
that allow you to re-configure your pager to more closely reflect
your lifestyle, set the date and time, and select the alert modes and
types. For information on customizing other features, see “Custom-
ize” on page 47.
Turning On and Off Your PageWriter 2000X Pager
The rechargeable battery in your PageWriter 2000X Two-Way
Wireless Communications Center allows you to leave your pager
turned on 24 hours a day and, depending upon usage, can sustain
operation for approximately a week before requiring a recharge.
However, your PageWriter 2000X Two-Way Wireless Communica-
tions Center works much like your computer. Periodically turning
off your pager assists in clearing the random-access memory (RAM)
and can help optimize your pager’s performance. Turning off your
pager at night will also lengthen the time of your battery’s charge.
Wireless Communications Center allows you to leave your pager
turned on 24 hours a day and, depending upon usage, can sustain
operation for approximately a week before requiring a recharge.
However, your PageWriter 2000X Two-Way Wireless Communica-
tions Center works much like your computer. Periodically turning
off your pager assists in clearing the random-access memory (RAM)
and can help optimize your pager’s performance. Turning off your
pager at night will also lengthen the time of your battery’s charge.
To turn on your pager:
Press any key.
To turn off your pager:
1. Press
.
-or-
2. Select
from the menu wheel.
To reset your pager:
Turn off your pager as indicated in the previous procedure, then
press any key to turn the pager back on.
press any key to turn the pager back on.
-or-
1. Hold the pager face down.
1. Hold the pager face down.
TIP
Incoming messages are stored by the paging service until
your pager is turned back on and ready to receive messages.
Turn your pager off at night when you do not want to receive
messages, and place the pager in the plugged-in charger so it
will be fully charged and ready for use in the morning. If you
prefer to leave your pager on, use the Quiet Time feature to
specify the time period that message alerts will not be
played.
your pager is turned back on and ready to receive messages.
Turn your pager off at night when you do not want to receive
messages, and place the pager in the plugged-in charger so it
will be fully charged and ready for use in the morning. If you
prefer to leave your pager on, use the Quiet Time feature to
specify the time period that message alerts will not be
played.