Denon S81 User Manual
Using other functions
21
ENGLISH
Using other functions
10 SEC
(Set upon purchase)
:
The display automatically turns off after approximately 10 seconds.
CONTINUE:
Displayed continuously.
Displayed continuously.
Setting the low-power standby mode
Setting the time display time in the standby mode
Use
8
or
9
to select “10SEC” or
“CONTINUE”, then press
[MENU/SET]
.
Use
[MENU/SET]
to select “TIME DISPLAY”.
2
1
ON
(Set upon purchase)
:
Low-power standby mode.
OFF:
Normal mode.
Normal mode.
Setting the low-power standby mode (Eco mode)
Use
8
or
9
to select “ON” or “OFF”, then
press
[MENU/SET]
.
Use
[MENU/SET]
to select “ECO MODE”.
2
1
See page 13 for information on the power indicator.
ENGLISH
Use
8
or
9
to select “ON” or “OFF”, then
press
[MENU/SET]
.
Making the speaker settings
2
1
This procedure can be used to set the optimum sound quality for your
speakers and the installation conditions in your room.
speakers and the installation conditions in your room.
Use
[MENU/SET]
to select “SPK OPTIMISE”.
ON WALL:
Set this when the speakers are installed on a wall or when there is
a wall directly behind them.
Set this when the speakers are installed on a wall or when there is
a wall directly behind them.
ON SHELF
(Set upon purchase)
:
Set this when using the included speaker stand.
Setting the speaker locations
Use
8
or
9
to select “ON WALL” or “ON
SHELF”, then press
[MENU/SET]
.
Use
[MENU/SET]
to select “SPK LOCATION”.
2
1
Set the locations in which the speakers are installed.
This cannot be set when “SPK OPTIMISE” is set to “OFF”.
Setting the speakers low bass sound
ON
(Set upon purchase)
:
This is the optimum setting for the SC-S81 (the speaker included
with the S-81). (We recommend using this setting normally.)
with the S-81). (We recommend using this setting normally.)
Set this according to the speakers being used.
LOW:
Set this when the reverberations in the room are too weak (when
there is not enough treble sound).
Set this when the reverberations in the room are too weak (when
there is not enough treble sound).
MID
(Set upon purchase)
:
Set this when the reverberations in the room are moderate.
Making the room damping setting
Use
8
or
9
to select “LOW”, “MID” or
“HIGH”, then press
[MENU/SET]
.
Use
[MENU/SET]
to select “ROOM DAMPING”.
2
1
Set this according to the level of the reverberations in the room.
This cannot be set when “SPK OPTIMISE” is set to “OFF”.
HIGH:
Set this when the reverberations in the room are too strong (when
there is too much treble sound).
Set this when the reverberations in the room are too strong (when
there is too much treble sound).
OFF:
Set this when using speakers other than the ones included. (For
directions and cautions on connecting the speakers, see “Speaker
connections” (
Set this when using speakers other than the ones included. (For
directions and cautions on connecting the speakers, see “Speaker
connections” (
page 8).)