Lucent Technologies 4.1 User Manual
Considerations
■
■
An Automatic System Answer button must be programmed on a button with
lights on the system display phone at extension 10. (This feature will not
work if it is programmed on a button without lights.)
Automatic System Answer can handle up to three outside calls
simultaneously.
simultaneously.
Valid Entries
1 =
2 =
3 =
2 =
3 =
Assigned
Not Assigned
Not Assigned
✔
Select button (then press a programmable button to assign Automatic
System Answer to that button)
System Answer to that button)
Programming
To assign or unassign an Automatic System Answer button with lights at
extension 10:
1.
Press [
Feature
] [
0
] [
0
] [
System Program
] [
System Program
] [
#
] [
1
] [
1
] [
1
].
2.
If you want to assign Automatic System Answer to the first available button,
press [
press [
Next Data
] until a display similar to the following appears:
ASA Button
1 Assigned - Ext10
If you want to unassign Automatic System Answer, press [
Next Data
] until a
display similar to the following appears:
ASA Button
2 Not Assigned
If you want to assign Automatic System Answer to a specific button, press
[
[
3
]. A display similar to the following appears:
ASA Button
3 Select a Button
Then press a programmable button with lights to assign Automatic System
Answer to that button.
Answer to that button.
3.
Select another procedure or exit programming mode.
4.
Label the Automatic System Answer button at extension 10.
5-22
Automatic System Answer Button (#111)