ICOM IC-208H Instruction Manual

22

4

REPEATER OPERATION

■ Subaudible tones

[

(Encoder function)

D Subaudible tones

q Select the frequency band, mode/channel you wish to set

the subaudible tones, such as VFO mode or memory/call
channel.

w Push [SET•LOCK] to enter set mode.
e Push [SET•LOCK] or [DUP•MONI] several times until “T”

and “rT” appear; or until “T SQL” and “CT” appear for tone
squelch or pocket beep use.

• When “d” is displayed in place of the 100 MHz digit, cancel the

DTMF memory encoder in advance. (p. 50)

r Rotate [DIAL] to select and set the desired subaudible fre-

quency.

t Push [V/MHz•SCAN] to exit set mode.

☞NOTE: The subaudible tone encoder frequency can be set

in a memory/call channel temporarily. However, the set fre-
quency is cleared once another memory channel or VFO
mode is selected. To store the tone frequency permanently,
overwrite the channel information.

z Set the frequency band, mode/channel you wish

to set the subaudible tones, such as VFO mode
or memory/call channel.

• The subaudible tone frequency is independently pro-

grammed into each mode or channel.

x Push [

SET

B(D-OFF)] to enter set mode.

c Push [

SET

B(D-OFF)] or [

ENT

C(T-OFF)] several

times until “T” and “rT” appears; or until “T SQL”
and “CT” appears for tone squelch or pocket
beep use.

• When “d” is displayed in place of the 100 MHz digit,

cancel the DTMF memory encoder in advance. (p. 50)

v Push [Y] or [Z] to select and set the desired

subaudible tone frequency.

• Push and hold [Y]/[Z] to change the above tones

continuously.

b Push [

CLR

A(MW)] to exit set mode.

(unit: Hz)

67.0
69.3
71.9
74.4
77.0

79.7
82.5
85.4
88.5
91.5

94.8
97.4

100.0
103.5
107.2

110.9
114.8
118.8
123.0
127.3

131.8
136.5
141.3
146.2
151.4

156.7
159.8
162.2
165.5
167.9

171.3
173.8
177.3
179.9
183.5

186.2
189.9
192.8
196.6
199.5

203.5
206.5
210.7
218.1
225.7

229.1
233.6
241.8
250.3
254.1

Push         

SET

B

[SET•LOCK]

“T” and “rT” appears