Lucent Technologies 6 User Manual

Page of 472
MERLIN LEGEND Communications System Release 6.0
System Manager’s Guide  
555-660-118  
Issue 1
February 1998
System Components 
Page 3-5
Control Unit 
3
Line/Trunk and Extension Modules
3
Line/trunk and extension modules have jacks for connecting telephone company 
lines/trunks and extension wires to the control unit. The system supports 17 types 
of line/trunk and extension modules. For maximum flexibility, some modules 
support only lines/trunks, some only extensions, and some a combination of the 
two.
Each module has a label that contains its name. As noted in Chapter 2, “About the 
System,” the names of the modules identify their capacities and capabilities. The 
first digit indicates the number of line/trunk jacks a module supports, while the last 
two digits describe the number of extension jacks it supports. Following the 
number may be letters that indicate the type of trunk or trunks it supports; for 
example, LS for 
loop-start 
and GS for
 ground-start
. A line/trunk module name with 
no letter following it supports loop-start trunks. The following are examples of 
module names:
The 408 GS/LS MLX module provides four trunk jacks supporting 
ground-start and/or loop-start trunks and eight MLX extension jacks. 
The 016 module (Release 4.0 and later only) provides 16 extension jacks 
that, in this case, supply tip/ring (T/R) connections for single-line 
telephones, modems, voice messaging systems that serve the system as a 
whole, and other components.
The balance of this section presents some specific information about the modules 
that connect extensions and the modules that connect lines/trunks. 
and 
 present summary information. 
Modules Supporting Extensions
3
 describes the type of equipment that each module supports. This 
section highlights some important points about extension modules.
NOTE:
Extension jacks connect to individual telephones and to adjuncts that are 
attached to extensions. Some adjuncts and applications serve the whole 
system and connect directly to line/trunk jacks.
Extension Jacks
3
While the jacks that support MLX extensions and the jacks that support analog 
extensions may look the same, there is a major difference: an MLX extension jack 
actually supports two extension numbers at each location served by the jack.
When you use an adapter called a Multi-Function Module in an MLX telephone, 
you can connect a T/R device (for example, a modem, a fax machine, or an 
answering machine) to that telephone. Even though a single extension jack on the