Cobra Electronics MicroTalk User Manual
The i con will appe a r.
Operation
13
Note
While PTT button is
depressed you cannot
receive incoming calls.
depressed you cannot
receive incoming calls.
Note
When you release the
PTT button,the person you
are talking to will hear a
tone indicating that it’s ok
to talk. See Talk
Confirmation Tone section
on page 14.
PTT button,the person you
are talking to will hear a
tone indicating that it’s ok
to talk. See Talk
Confirmation Tone section
on page 14.
Operation
12
Talking To Another Party
To send your outgoing message:
Turn on your MicroTalk 2-way radio.
An audible “tone” will indicate the unit is on.
The LCD will go through a 3 second self test
and then go to operational mode.
An audible “tone” will indicate the unit is on.
The LCD will go through a 3 second self test
and then go to operational mode.
Talking to
Another
Party
Another
Party
Hold mic about
2 inches from
mouth. Speak in
a normal voice.
2 inches from
mouth. Speak in
a normal voice.
Release
button
and listen for
response.
response.
Push and hold button.
3
4
5
6
1
Place antenna in full
upright position.
upright position.
2
Note
Both units must be on same
channel and subchannel to
communicate.
channel and subchannel to
communicate.
310WX.MANUAL.qx copy 6/17/99 12:18 PM Page 12