Hitachi 32LD6600B User Manual

Page of 36
- 33 -
*%
Installation Of The TFT TV To The Wall
1- To install the TFT TV on the wall, first of all, foot assembly should be removed. (Figure 1).
Unscrew the 4 screws (M3 x 6) that attach the foot assembly to the TFT panel and remove
the foot assembly  from the TFT panel.
2- Place the 4  plastic pins to the circular screw holes at the rear of the TFT and screw them
to the TFT panel with 4  (6 x 20) screws.
3- Decide the place on the wall where the TFT panel would be placed. Fix the wall mounting
stencil on the wall.
The stencil is used for placing the wall hangers on the wall, properly.
4- Level and mark with a pencil the 4 mounting points on each wall hanger.
Drill pilot holes for the plastic anchors (7x30) and then fix the wall hangers with 8 screws
(4 x 30).
5-  Raise  the  TFT  panel  and  hang  it  to  the  holes  on  the  wall  hanger  from  the  4  hanging
screws at the rear of the TFT panel.
7)73$1(/
6&5(:+2/(6
)253/$67,&3,16
6&5(:6
0;
)227$66(0%/<
)LJXUH
32705 duvara montaj (13 DIL).p65
26.10.2005, 15:38
1