Winegard HD-7015 Leaflet

 

Winegard Company • 3000 Kirkwood Street • Burlington, IA 52601-2000

 

 Winegard Company warrants this Winegard product against any defects in materials or workmanship 

within 90 (ninety) days from date of purchase. No warranty claim will be honored unless at the time the 
claim is made, you present proof of purchase to an authorized Winegard dealer (if unknown, please contact 
Winegard Company, 3000 Kirkwood Street, Burlington, IA 52601-2000, Telephone 800-288-8094).

  Winegard Company (at its option) will either repair or replace the defective product at no charge to you. 
This warranty covers parts, but does not cover any costs incurred in removal, shipping or reinstallation of 
the product. This limited warranty does not apply if the product is damaged, deteriorates, malfunctions or 
fails from: misuse, improper installation, abuse, neglect, accident, tampering, modification of the product as 
originally manufactured by Winegard, usage not in accordance with product instructions or acts of nature such 
as damage caused by wind, lightning, ice or corrosive environments such as salt spray and acid rain.

  The 90 Day Warranty is provided on the condition that the equipment is properly delivered with all han-
dling and freight charges prepaid to your Winegard dealer for return to our factory for repair or replacement. 
Winegard dealers will arrange for the replacement or repair and return to you without charge the product 
which failed due to defective material or workmanship.

  WINEGARD  COMPANY  WILL  NOT  ASSUME  ANY  LIABILITIES  FOR  ANY  OTHER  WARRANTIES, 
EXPRESS OR IMPLIED, MADE BY ANY OTHER PERSON.

  ALL OTHER WARRANTIES WHETHER EXPRESS, IMPLIED OR STATUTORY INCLUDING WARRAN-
TIES OF FITNESS FOR A PARTICULAR PURPOSE AND MERCHANTABILITY ARE LIMITED TO THE 
90-DAY PERIOD OF THIS WARRANTY.

  The foregoing shall be the sole and exclusive remedy of any person, whether in contract, tort or otherwise, 
and Winegard shall not be liable for incidental or consequential damage or commercial loss, or from any 
other loss or damage except as set forth above.

  Some states do not allow limitations on how long an implied warranty lasts, or the exclusion of limitation 
of incidental or consequential damages, so the above limitations or exclusions may not apply to you.

  This warranty gives you specific legal rights and you may also have other rights which vary from state 
to state.

Printed in U.S.A.  © Winegard Company 2003  1450172  REV4, 10/10

Rev. 2/08

Antenna Lead

In Wire

Ground

Clamp

Electric

Service

Equipment

Antenna

Discharge Unit

(NEC Section 810-20)

Power Service Grounding

Electrode System

(NEC Art 250, Part H)

Ground 

Clamps

Grounding Conductors

(NEC Section 810-21)

(May substitute a 75 ohm 

Coax Grounding Block)

Step 1. Mount the lightning arrestor or 

75 ohm coaxial grounding block as close 

as possible to where the 75 ohm coaxial 

cable downlead enters the house. See 

Figure 9.

Step 2. The ground wires for both the 

mast and the downlead should be cop-

per or aluminum wire, number eight (8) 

or larger. See Figure 9.

Step 3. The downlead wire from the 

antenna to the lightning arrestor and the 

mast ground wire should be secured to 

the house, spaced from four (4) to six (6) 

feet apart. See Fig. 9.

NOTE: In the case of a “ground up” 

antenna installation, it may not be nec-

essary to ground the mast if the mast 

extends four or more feet int the earth. 

Consult a TV serviceman for the proper 

depth in your location.