Manualsbrain.com
  1. Manuals
  2. Brands
  3. Toshiba
  4. B-SX8T SERIES
  5. User Manual

Toshiba B-SX8T SERIES User Manual

Download
Page of 139
2. PRINTER SETUP 
ENGLISH VERSION EO1-33057 
2.5 Loading the Ribbon
 
E2-16 
2.5  Loading the Ribbon 
(Cont.) 
 
 
 
6. 
Take up any slack in the ribbon.  Wind the leading tape onto the 
 
ribbon take-up roll until the ink ribbon can be seen from the front of 
the printer.
 
 
 
 
7.  Close the Head Lock Plate, Right Side Cover, and Top Cover.  
 
 
 
 
8.  Turn the Head Lever to the Position 1 or 2.  For the difference 
between Position 1 and Position 2, refer to Section 2.4.   
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
NOTES: 
1.  Be sure to remove any slack in 
the ribbon when printing.  
Printing with a wrinkled ribbon 
will lower the print quality.  
2.  When a ribbon end is detected, 
“RIBBON ERROR” message 
will appear on the display and 
the ERROR LED will illuminate. 
3.  When disposing of the ribbons, 
please follow the local rules.  
4.  For the specification of 
available ribbon, refer to 
Section 7.2 Ribbon. 
5.  When using a non transparent 
ribbon, choose the Non trans 
ribbon for the parameter setting 
in the system mode. (Section 
2.8.1 Parameter Setting.) 
 
Transparent ribbon has been 
selected as default. 
Right Side Cover
Top Cover 
Head Lock Plate
Head Lever
2: Tag paper or Thick paper
1: Label or Thin media
Ribbon Supply Roll 
Ribbon Take-up Roll