Hitachi 42PD8600 User Manual
- 13 -
Sleep Timer
By pressing
a
/
b
button, select Sleep
Timer. The timer can be programmed be-
tween Off and 2 hours in steps of 10 min-
utes by pressing
tween Off and 2 hours in steps of 10 min-
utes by pressing
_
/
`
button. If sleep timer
is activated, at the end of the selected time,
the TV goes automatically to stand-by mode.
the TV goes automatically to stand-by mode.
Child Lock
You can use this feature to prevent children
turning the TV on or changing programs or
adjustments etc. without remote control.
turning the TV on or changing programs or
adjustments etc. without remote control.
The child lock feature can be set by
_
/
`
but-
ton to either on or off. When off is selected,
there will be no difference in the operation of
your TV. When on is selected, the TV can
only be controlled by the remote control
handset. In this case the control panel but-
tons, except the Power on/off button, at the
bottom of the TV will not work. If one of these
buttons is pressed, “Child Lock On” will be
displayed on the screen.
there will be no difference in the operation of
your TV. When on is selected, the TV can
only be controlled by the remote control
handset. In this case the control panel but-
tons, except the Power on/off button, at the
bottom of the TV will not work. If one of these
buttons is pressed, “Child Lock On” will be
displayed on the screen.
Language
By pressing
a
/
b
button, select Language.
By pressing
_
/
`
button, you can select the
language.
Ext-2 Out
By pressing
a
/
b
button, select Ext-2 Out.
You can set Ext-2 Out to TV, EXT-1, EXT-3,
EXT-4, EXT-5, EXT-6 or PC by pressing
EXT-4, EXT-5, EXT-6 or PC by pressing
_
/
`
button.
Note: Only audio output is available for EXT-
4, EXT-6 and PC. The other options have
both audio and video outputs.
4, EXT-6 and PC. The other options have
both audio and video outputs.
Default Zoom
By pressing
a
/
b
button, select Default
Zoom. You can set Default Zoom to Pan-
oramic, 4:3 or 14:9 Zoom by pressing
oramic, 4:3 or 14:9 Zoom by pressing
_
/
`
button. If there is no WSS or aspect ratio
(picture size) information and zoom mode is
selected as Auto by pressing the
(picture size) information and zoom mode is
selected as Auto by pressing the
button,
then the zoom mode will automatically
change to Default Zoom setting. See also
Zoom Modes on page 18.
change to Default Zoom setting. See also
Zoom Modes on page 18.
Blue Background
You can set the TV to automatically change
to a blue screen if the signal is weak or ab-
sent, or when there is no input from an exter-
nal device.
to a blue screen if the signal is weak or ab-
sent, or when there is no input from an exter-
nal device.
The Blue Background feature can be turned
on or off by pressing
on or off by pressing
_
/
`
button.
Menu Background
By pressing
a
/
b
button, select Menu
Background. You can change menu back-
ground to Translucent or Opaque by press-
ing
ground to Translucent or Opaque by press-
ing
_
/
`
button.
Menu Timeout
By pressing
a
/
b
button, select Menu
Timeout. Press
_
/
`
button to change menu
timeout to 15 sec, 30 sec or 60 sec.
Teletext Language
By pressing
a
/
b
button, select Teletext
Language. Press
_
/
`
button to change
Teletext Language to West, East, Cyrillic,
Turk/Gre or Arabic. This will normally be set
to West for Western Europe.
Turk/Gre or Arabic. This will normally be set
to West for Western Europe.
Screen Saver
By pressing
a
/
b
button, select Screen
Saver. Press
_
/
`
or “OK” button to enter
screen saver menu.
This menu has three items related to pos-
sible image retention problem in plasma
display panels. First two items (Screen
Wipe, Inverse) of this menu are used to re-
move the effects after the problem occured
and the last item (Pixel Shift) is used to pre-
vent this problem.
sible image retention problem in plasma
display panels. First two items (Screen
Wipe, Inverse) of this menu are used to re-
move the effects after the problem occured
and the last item (Pixel Shift) is used to pre-
vent this problem.
Screen Wipe : When OK is pressed on this
item the panel is driven with full white picture
for one hour unless any user command is
entered. During this mode if any user com-
mand is entered, Screen Saver menu will be
displayed on the screen with Screen Wipe
highlighted.
item the panel is driven with full white picture
for one hour unless any user command is
entered. During this mode if any user com-
mand is entered, Screen Saver menu will be
displayed on the screen with Screen Wipe
highlighted.
Inverse: When OK is pressed on this item
the colour of each pixel of the displayed im-
age is inverted for one hour unless any user
command is entered.
the colour of each pixel of the displayed im-
age is inverted for one hour unless any user
command is entered.