Winegard HD7084P Leaflet

Page of 2
VHF/UHF MODEL 
HD7084P & HD7697P 
 
Winegard Company • 3000 Kirkwood Street • Burlington, IA 52601-2000
NOTE
To prevent damage in shipping, the second set of elements from the rear of the 
boom are folded to the reverse side. You can identify these elements by the tags 
attached to them. Follow the directions on the tags carefully.
WARNING
INSTALLATION OF THIS ANTENNA NEAR POWER LINES IS DANGEROUS. 
FOR YOUR SAFETY, FOLLOW THE INSTALLATION INSTRUCTIONS.
VHF/UHF
MODEL HD7697P
769 Series Antennas
Digital/High Definition
VHF/UHF
MODEL HD7084P
POINT
 THIS END 
TOW
ARDS ST
ATIONS
POINT
 THIS END 
TOW
ARDS ST
ATIONS
90 DAY LIMITED WARRANTY
  
Winegard Company warrants this Winegard product against any defects in materials or work-
manship within 90 (ninety) days from date of purchase. No warranty claim will be honored unless 
at the time the claim is made, you present proof of purchase to an authorized Winegard dealer (if 
unknown, please contact Winegard Company, 3000 Kirkwood Street, Burlington, IA 52601-2000, 
Telephone 800-288-8094).
  Winegard Company (at its option) will either repair or replace the defective product at no charge 
to you. This warranty covers parts, but does not cover any costs incurred in removal, shipping or 
reinstallation of the product. This limited warranty does not apply if the product is damaged, deterio-
rates, malfunctions or fails from: misuse, improper installation, abuse, neglect, accident, tampering, 
modification of the product as originally manufactured by Winegard, usage not in accordance with 
product instructions or acts of nature such as damage caused by wind, lightning, ice or corrosive 
environments such as salt spray and acid rain.
  The 90 Day Warranty is provided on the condition that the equipment is properly delivered with all 
handling and freight charges prepaid to your Winegard dealer for return to our factory for repair or 
replacement. Winegard dealers will arrange for the replacement or repair and return to you without 
charge the product which failed due to defective material or workmanship.
  WINEGARD COMPANY WILL NOT ASSUME ANY LIABILITIES FOR ANY OTHER WARRANTIES, 
EXPRESS OR IMPLIED, MADE BY ANY OTHER PERSON.
  ALL  OTHER  WARRANTIES  WHETHER  EXPRESS,  IMPLIED  OR  STATUTORY  INCLUDING 
WARRANTIES  OF  FITNESS  FOR A  PARTICULAR  PURPOSE AND  MERCHANTABILITY ARE 
LIMITED TO THE 90-DAY PERIOD OF THIS WARRANTY.
  The foregoing shall be the sole and exclusive remedy of any person, whether in contract, tort or 
otherwise, and Winegard shall not be liable for incidental or consequential damage or commercial 
loss, or from any other loss or damage except as set forth above.
  Some states do not allow limitations on how long an implied warranty lasts, or the exclusion of 
limitation of incidental or consequential damages, so the above limitations or exclusions may not 
apply to you.
  This warranty gives you specific legal rights and you may also have other rights which vary from 
state to state.
Printed in U.S.A.  © Winegard Company 2002 Rev3 12-13  1450291
Rev. 2/08
Fig. 10
HOW TO PROVIDE LIGHTNING 
PROTECTION FOR TV ANTENNA  
AND SET
Step 1. 
Mount the lightning arrestor 
or 75 ohm coaxial grounding block as 
close as possible to where the 75 ohm 
coaxial cable downlead enters the 
house. See Figure10.
Step 2. The ground wires for both 
the mast and the downlead should 
be copper or aluminum wire, number 
eight (8) or larger. See Figure 10.
Step 3. The downlead wire from 
the antenna to the lightning arrestor 
and the mast ground wire should be 
secured to the house with stand-off 
insulators, spaced from four (4) to six 
(6) feet apart. See Fig. 10.
NOTE: In the case of a “ground up” 
antenna installation, it may not be 
necessary to ground the mast if the 
mast extends four or more feet int the 
earth. Consult a TV serviceman for the 
proper depth in your location. 
Antenna Lead
In Wire
Ground
Clamp
Electric
Service
Equipment
Antenna
Discharge Unit
(NEC Section 810-20)
Power Service Grounding
Electrode System
(NEC Art 250, Part H)
Ground 
Clamps
Grounding Conductors
(NEC Section 810-21)
NEC - National Electrical Code
Example of antenna grounding as per
National Electrical Code, ANSI/NFPA 70
(May substitute a 75 ohm 
Coax Grounding Block)
Register your product at winegard.com/myantenna