LOEWE Individual 32 Compose 3D User Manual

127 -

 Operating Loewe equipment

Press the  TV  button, the display above it will light for 
approx. 5 seconds.

Press the  REC button, the display above it will light for 
approx. 5 seconds.

Press the  DVD button, the display above it will light for 
approx. 5 seconds.

Press the  AUDIO button, the display above it will light for 
approx. 5 seconds.

As long as a button is pressed, the display of the selected operating mode 
lights up (TV – REC – DVD – AUDIO). This allows you to check which op-
erating mode the remote control is set to every time you press a button.

The factory setting of the buttons is described above (see also table in 
right hand column). The assignment of the buttons can be changed to 
suit the existing accessory devices (see right hand column).

 Setting the  remote control for other Loewe devices
You can operate various Loewe devices with the remote control. The 
device keys REC – DVD – AUDIO can be reassigned to operate various 
Loewe devices. 

Press the required device buttons and the Stop button 
simultaneously for 5 sec. until the corresponding LED 
display flashes twice. 

Then enter the two-digit device code from the list below.

Loewe ViewVision 8106 H

10

Loewe Viewvision, Centros 21x2

12

Loewe Auro 2216 PS/8116 DT

14

Loewe BluTech Vision

15

Loewe Soundprojector

17

Loewe Mediacenter

20

Loewe AudioVision

24

Loewe Individual Sound Projector SL

25

Apple IR codes

26

Apple IR codes (Apple TV-2G)

27

Resetting to factory setting

99

The associated LED display flashes twice.

➠  The codes shown here only apply for direct operation of the acces-

sory device. 

➠

  For operation of the connected accessory device via the TV set, e.g. 

with concealed installation (Code 22), see page 115. The remote 
control’s signal is transmitted from the TV set to the accessory device 
with concealed installation.

External devices