LOEWE Individual 32 Compose 3D User Manual

35 -

For analogue stations: In the case of programmes with 
twin sound, you can select separately between Mono/
Stereo or Sound 1 or Sound 2 for the loudspeakers and 
the headphones. 

For DVB channels: You can choose here if you wish to 
listen to a special soundtrack for the visually impaired over 
the speakers. This soundtrack uses an  audio commentary 
to describe the action taking place on-screen.
The menu item only appears if an audio commentary is 
offered by the current channel.

Reduces volume differences, e.g. for advertisements that 
are too loud.

You can indicate here which sound is output via the AV 

socket for dual sound programmes: Sound 1 (e.g. main 
language), sound 2 (e.g. foreign language), or sound 1+2 
(both simultaneously).

 Determining the maximum volume that can be set.

Specify the volume that is set when switching on the TV 
set with the mains switch. 
If the volume is higher when switching the TV set to the 
standby mode than specified here, then it is reduced 
automatically to the fixed maximum switching on volume 

when it is turned on again.

The volume can differ according to the individual stations. 
If the sound is too loud or too quiet in relation to other 
stations, adjust the volume. When the menu is open, you 
can select the stations one after another with P+/P– and 

adjust every single station conveniently.

Set stereo balance so that the volume impression is identical 
on the left and right.

If the automatic speech detection is activated, the sound 
of the current programme is automatically output with 

optimum comprehensibility when speech is detected.

Daily operation

Loudspeaker/ 

Headphone 

sound

Auto Volume

 AV output 

signal

Maximum 

volume

 max. switch on

volume

 Volume 

adjustment for 

current station

 Balance

 Auto speech 

detection