LOEWE Individual 32 Compose 3D User Manual

61 -

 Conditional Access module (CA module)

In order to receive coded digital stations, a Conditional Access module 
( CA module) and a Smart Card must be inserted in the  CI slot of your TV 
set (see page 11). 
The CA module and the Smart Card are not part of the TV set’s scope 

of delivery. They are usually available from your dealer. Loewe does not  
provide any guarantee for the functioning of the CA module.
The TV set must first recognise and set up the CA module during initial 
operation. Therefore, it can take up to a minute until decoding starts 
during initial operation.

Inserting the Smart Card into the CA module
Push the  Smart Card into the CA module as far as it goes so that the side 
with the gold coloured contact chip is facing the side of the CA module 
marked with the provider’s logo. Note the direction of the arrow printed 
on the Smart Card.

➠ Switch off the TV set’s mains switch.
Remove the cover from the rear of the set.

Carefully insert the CA module in CI slot 1 or CI slot 2 
with the contact side forward.
If you are standing in front of the TV set (display) then 

the logo on the CA module must be pointing to the rear. 
Do not use force. Make sure the module is not twisted 
in the process. If the CA module is correctly installed, the 

ejector button protrudes a little further.
Replace the cover.

Coded Stations

➠  The search wizard must only be started if the setting 

option no has been selected during first installation in 
the search for encrypted stations and no CA-module 
was inserted.

MENU: Call TV menu.

  Select  Settings,
  go to the menu line below.

  Select  Stations,
  go to the menu line below.

  Select  Search wizard,
  go to the menu line below.

Select Change search settings,

  OKwizard guides you through the search settings.

See page 44 for a description of the search settings.

➠  This menu is only available for digital stations and when 

a CA module is plugged in.

MENU: Call TV menu.

 Select  CA module: xxx,

  OKcall information.

The content of this menu depends on the provider of the 

CA module.
The CA module information can also be called up in the 

TV menu under Settings 

ט Other ט CA module: xxx (xxx 

corresponds to the CA module provider).

➠ Switch off the TV set’s mains switch.
Remove the cover from the rear of the set.

Press in the ejector button on the appropriate module 
drawer, the module is released.

Remove the module from the set.

Replace the cover.

Ejector
button