Samsung TD390S User Manual
When Aerial Source is set to Terrestrial or Cable
•
Digital Channel Tuning
Scans for a digital channel.
1. Select the
New
.
✎
When selecting
Aerial
→
Terrestrial
:
Channel
,
Frequency
,
Bandwidth
✎
When selecting
Aerial
→
Cable
:
Frequency
,
Modulation
,
Symbol Rate
2. Select the
Search
. When scanning has finished, a channel is updated in the channel list.
•
Analogue Channel Tuning
Scans for an analogue channel.
1. Select the
New
.
2. Set the
Programme
,
Colour System
,
Sound System
,
Channel
and
Search
.
3. Select the
Store
. When scanning has finished, a channel is updated in the channel list.
Channel mode
•
P
(programme mode)
When tuning is complete, the broadcasting stations in your area have been assigned to position numbers from P0 to
P99. You can select a channel by entering the position number in this mode.
P99. You can select a channel by entering the position number in this mode.
•
C
(aerial channel mode) /
S
(cable channel mode)
These two modes allow you to select a channel by entering the assigned number for each aerial broadcasting
station or cable channel.
station or cable channel.
Fine-Tuning the Screen
Broadcasting
→
Channel Settings
→
Fine Tune
✎
Available for analogue broadcasts only.
Analogue pictures can become shaky and full of noise. If this happens, you can fine-tune the signal and/or reduce noise
to clear up the picture.
to clear up the picture.
1. Select
Channel Settings
→
Fine Tune
. An adjustment bar appears on the screen.
2. Press the
¡
or
£
button to make adjustments. Select
Save
or
Close
to apply the new setting. Select
Reset
to
reset the Fine-Tune operation.
English - 94
English - 95
Preference Features