Uniden UH-052XR User Manual
TO TRANSMIT AND RECEIVE
The UH-052XR uses the 40 UHF-CB Channels. For your reference a list of
the available channels and corresponding frequencies is printed at the end
of this manual.
the available channels and corresponding frequencies is printed at the end
of this manual.
1. The maximum RF transmit power of
UH-052XR
is 5 watts.
To switch to low power, press the
[1/5W]
. LOW appears on the LCD.
To switch back to higher power, press
the
the
[1/5W]
again. LOW indicator
disappears from the LCD.
2. Before you transmit, listen for
activity on the selected channel.
3. When the channel is clear, press
and hold the
[PTT]
to transmit.
TX appears on the LCD.
Hold the radio with microphone approximately two inches in front of your
mouth with the antenna at approximately 45˚ angle away from your head.
Speak in a clear, normal conversational voice.
mouth with the antenna at approximately 45˚ angle away from your head.
Speak in a clear, normal conversational voice.
4. When you have finished speaking, release the
[PTT]
and listen for a
response. TX indicator then disappears on the LCD.
The display shows BUSY when a
transmission is being received by your
radio.
transmission is being received by your
radio.
CTCSS
BCL
VOX
CTCSS
OS/GS
LOCK
DUP
PTT
switch
BCL
VOX
CTCSS
OS/GS
LOCK
DUP
8