Fostex FD-4 User Manual
Storing a Locate Point (Edit Point)
65
2
4
2
2
1
3
EQ
EQ
Editing the data stored in the LOCATE key
You can recall the last located point and edit the value.
You can use the edited value to locate the point later or
store it to another memory key.
You can use the edited value to locate the point later or
store it to another memory key.
1. Press the SHIFT and LOCATE keys simultaneously while
the FD-4 is stopped.
The last located point stored in the LOCATE key appears
on the display and the FD-4 enters data edit mode.
If no data is stored (that is, if the FD-4 has not located any
point since the power was turned on), 00H 00M 00S 00F
00SF appears and “00” of the digits “00S” flashes.
on the display and the FD-4 enters data edit mode.
If no data is stored (that is, if the FD-4 has not located any
point since the power was turned on), 00H 00M 00S 00F
00SF appears and “00” of the digits “00S” flashes.
2. Press the HOLD/> key, REWIND button, or the F FWD button
to move the flashing cursor to the time value digit, and use
the JOG dial to increase or decrease the number to the
desired value.
the JOG dial to increase or decrease the number to the
desired value.
3. To located the edited point, press the LOCATE key.
When you execute the Locate function, the locate point is
stored as locate data in the LOCATE key.
stored as locate data in the LOCATE key.
4. To store the edited data to another memory key, input the
desired value, press the STORE key, then press the desired
memory key.
memory key.
The data is stored to the corresponding memory key.
The data stored in the LOCATE key will not change.
The data stored in the LOCATE key will not change.
<Note>
You cannot preview the data stored in the LOCATE key, unlike other
memory keys.