Kenwood TM-G707A User Manual

6

KENWOOD   

FM DUAL BANDER TM-G707

If you intend to use this transceiver for Packet operation,
you will need the following equipment.

• Personal computer with communications software
• Terminal Node Controller (TNC)
• TNC power supply
• RS-232C cable
• 6-pin mini DIN plug (optional PG-5A)

For the DATA connector pins, refer to “PACKET
OPERATION” {page 61}.

◆

Do not share a single power supply between the transceiver and the
TNC.

◆

Keep as wide a separation between the transceiver and computer as
practical to reduce noise-pickup by the transceiver.

◆

One end of the optional PG-5A cable has not been connectorized.
Attach the appropriate connector that mates with the TNC connector.

TNC power

supply

RS-232C cable

TNC

PG-5A cable

TM-G707

KENWOOD

   

FM DUAL BANDER TM-G707

KENWOOD

   

FM DUAL 

FM DUAL 

■

If you plan to use an external speaker, choose a
speaker with an impedance of 8 Ω.  The external
speaker jack accepts a 3.5 mm (1/8") diameter mono
(2-conductor) plug.  Recommended speakers include
the SP-50B and SP-41.

■

To communicate in the voice modes, plug a 600 Ω
microphone equipped with an 8-pin modular
connector into the modular socket on the front panel
of the transceiver.  Press firmly on the plug until the
locking tab clicks.

Transceiver

power supply