Kenwood TM-G707A User Manual
32
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
MEMORY
➡ VFO TRANSFERS
Transferring the contents of a memory channel or the
Call channel to the VFO can be useful if you want to
search for other stations or a clear frequency, near the
selected memory channel or Call channel frequency.
Call channel to the VFO can be useful if you want to
search for other stations or a clear frequency, near the
selected memory channel or Call channel frequency.
1 Recall the desired memory channel or the Call
channel.
2 Press [F], [VFO].
• The entire contents of the memory channel or the Call
channel are copied to the VFO. VFO mode is selected
after the transfer is completed.
after the transfer is completed.
Note:
◆
A transmit frequency from an odd-split memory channel or odd-split
Call channel is not transferred to the VFO. To transfer a transmit
frequency, press
Call channel is not transferred to the VFO. To transfer a transmit
frequency, press
[REV]
, then press
[F]
,
[VFO]
.
◆
Lockout status and memory names are not copied from a memory
channel to the VFO.
channel to the VFO.
CHANNEL DISPLAY FUNCTION
When this function is switched ON, the transceiver
displays only a memory channel number instead of a
frequency.
displays only a memory channel number instead of a
frequency.
Press [LOW]+[ ] to switch this function ON (or OFF).
When in Channel Display mode, you cannot use the
following functions:
following functions:
• VFO Select
• Programmable Memory
Recall
• Memory Channel Store
• Memory
➞ VFO Transfer
• Freq. Step Size Change
• Easy Operation Select
• Programmable Memory
Reset
• MHz Function Select
• Programmable Memory
Store
• Call Channel Store
• Memory Channel Clear
• VFO Scan
• Partial/ Full reset
Note:
◆
You cannot switch this function ON if you have stored frequencies in
no memory channels.
no memory channels.
◆
When in Channel Display mode, you may want to recall only memory
channels of the desired band. Before pressing
channels of the desired band. Before pressing
[LOW]+[ ]
, select
“ONE” in Menu No. 4 (MR), then select the desired band.
1
2